#ifndef __BBMAGIC_LIB_H #define __BBMAGIC_LIB_H #include #ifdef __cplusplus extern "C" { #endif typedef unsigned char uint8_t ; typedef unsigned short uint16_t ; typedef short int16_t; typedef unsigned int uint32_t ; typedef int int32_t ; //--------------------------------------------------------------------------------------------- //--------------------------------------------------------------------------------------------- // BBMagic MODULES DEFs //--------------------------------------------------------------------------------------------- //--------------------------------------------------------------------------------------------- //-BBMagic devices types //--------------------------------------------------------------------------------------------- #define BBMAGIC_M_METEO 1 #define BBMAGIC_M_MOTION 2 #define BBMAGIC_M_BUTTON 3 #define BBMAGIC_M_FLOOD 4 #define BBMAGIC_M_MAGNETO 5 #define BBMAGIC_M_LINUXDEVICE 6 #define BBMAGIC_M_UART 7 #define BBMAGIC_M_RELAY 20 #define BBMAGIC_M_DIMMER 21 #define BBMAGIC_M_PWM 22 #define BBMAGIC_M_BBAIR 40 //-BBMagic METEO module //--------------------------------------------------------------------------------------------- #define BBM_METEO_WORKTIME_0 0 #define BBM_METEO_WORKTIME_1 1 #define BBM_METEO_WORKTIME_2 2 #define BBM_METEO_WORKTIME_3 3 #define BBM_METEO_V_SUP 5 #define BBM_METEO_ADV_TIME 6 #define BBM_METEO_DIN_STATE 7 #define BBM_METEO_TEMPER_MSB 8 #define BBM_METEO_TEMPER_LSB 9 #define BBM_METEO_HUM 10 #define BBM_METEO_LIGHT 11 #define BBM_METEO_ADC_1_MSB 12 #define BBM_METEO_ADC_1_LSB 13 #define BBM_METEO_ADC_2_MSB 14 #define BBM_METEO_ADC_2_LSB 15 //-BBMagic BUTTON module //--------------------------------------------------------------------------------------------- #define BBM_BUTTON_SIGN_0 0 #define BBM_BUTTON_SIGN_1 1 #define BBM_BUTTON_SIGN_2 2 #define BBM_BUTTON_SIGN_3 3 #define BBM_BUTTON_V_SUP 5 #define BBM_BUTTON_BUTTON_FUNCTION 7 #define BBM_BUTTON_INPUT_PINS 8 #define BBM_BUTTON_CHIP_TEMP 9 #define BBM_BUTTON_LIGHT 10 #define BBM_BUTTON_FIRM_1 14 #define BBM_BUTTON_FIRM_0 15 #define BBM_BUTTON_FN_SINGLE_CLICK 1 #define BBM_BUTTON_FN_DOUBLE_CLICK 2 #define BBM_BUTTON_FN_HOLDING 3 //-BBMagic MOTION module //--------------------------------------------------------------------------------------------- #define BBM_MOTION_WORKTIME_0 0 #define BBM_MOTION_WORKTIME_1 1 #define BBM_MOTION_WORKTIME_2 2 #define BBM_MOTION_WORKTIME_3 3 #define BBM_MOTION_V_SUP 5 #define BBM_MOTION_FLAGS 7 #define BBM_MOTION_CHIP_TEMP 8 #define BBM_MOTION_LIGHT 9 #define BBM_MOTION_ADC_1_MSB 10 #define BBM_MOTION_ADC_1_LSB 11 #define BBM_MOTION_ADC_2_MSB 12 #define BBM_MOTION_ADC_2_LSB 13 #define BBM_MOTION_FIRM_1 14 #define BBM_MOTION_FIRM_0 15 #define BBM_MOTION_ALERT_MASK 0x80 //-BBMagic FLOOD module //--------------------------------------------------------------------------------------------- #define BBM_FLOOD_WORKTIME_0 0 #define BBM_FLOOD_WORKTIME_1 1 #define BBM_FLOOD_WORKTIME_2 2 #define BBM_FLOOD_WORKTIME_3 3 #define BBM_FLOOD_V_SUP 5 #define BBM_FLOOD_ADV_TIME 6 #define BBM_FLOOD_ALERT_FLAGS 7 #define BBM_FLOOD_CHIP_TEMP 8 #define BBM_FLOOD_FIRM_1 14 #define BBM_FLOOD_FIRM_0 15 #define BBM_FLOOD_ALERT_MASK 0x01 //-BBMagic MAGNETO module //--------------------------------------------------------------------------------------------- #define BBM_MAGNETO_WORKTIME_0 0 #define BBM_MAGNETO_WORKTIME_1 1 #define BBM_MAGNETO_WORKTIME_2 2 #define BBM_MAGNETO_WORKTIME_3 3 #define BBM_MAGNETO_V_SUP 5 #define BBM_MAGNETO_ADV_TIME 6 #define BBM_MAGNETO_FLAGS 7 #define BBM_MAGNETO_CHIP_TEMP 8 #define BBM_MAGNETO_LIGHT 9 #define BBM_MAGNETO_ADC_1_MSB 10 #define BBM_MAGNETO_ADC_1_LSB 11 #define BBM_MAGNETO_ADC_2_MSB 12 #define BBM_MAGNETO_ADC_2_LSB 13 #define BBM_MAGNETO_FIRM_1 14 #define BBM_MAGNETO_FIRM_0 15 #define BBM_MAGNETO_MAGNET_MASK 0x80 #define BBM_MAGNETO_IN_0_BIT 0x01 #define BBM_MAGNETO_IN_1_BIT 0x02 #define BBM_MAGNETO_IN_2_BIT 0x04 #define BBM_MAGNETO_IN_3_BIT 0x08 //-BBMagic RELAY module //--------------------------------------------------------------------------------------------- #define BBM_RELAY_WORKTIME_0 0 #define BBM_RELAY_WORKTIME_1 1 #define BBM_RELAY_WORKTIME_2 2 #define BBM_RELAY_WORKTIME_3 3 #define BBM_RELAY_V_SUP 5 #define BBM_RELAY_ADV_TIME 6 #define BBM_RELAYS_STATE 7 #define BBM_RELAY_CHIP_TEMP 8 #define BBM_RELAY_LIGHT 9 #define BBM_RELAY_ADC_1_MSB 10 #define BBM_RELAY_ADC_1_LSB 11 #define BBM_RELAY_ADC_2_MSB 12 #define BBM_RELAY_ADC_2_LSB 13 #define BBM_RELAY_FIRM_1 14 #define BBM_RELAY_FIRM_0 15 #define REL_CH0 1 #define REL_CH1 2 #define REL_CH2 4 #define REL_CH3 8 //-BBMagic DIMMER module //--------------------------------------------------------------------------------------------- #define BBM_DIMMER_WORKTIME_0 0 #define BBM_DIMMER_WORKTIME_1 1 #define BBM_DIMMER_WORKTIME_2 2 #define BBM_DIMMER_WORKTIME_3 3 #define BBM_DIMMER_V_SUP 5 #define BBM_DIMMER_ADV_TIME 6 #define BBM_DIMMER_CHIP_TEMP 7 #define BBM_DIMMER_LIGHT 8 #define BBM_DIMMER_VAL 9 #define BBM_DIMMER_NU_1 10 #define BBM_DIMMER_NU_2 11 #define BBM_DIMMER_ADC_1_MSB 12 #define BBM_DIMMER_ADC_1_LSB 13 #define BBM_DIMMER_FIRM_1 14 #define BBM_DIMMER_FIRM_0 15 //-BBMagic PWM module //--------------------------------------------------------------------------------------------- #define BBM_PWM_WORKTIME_0 0 #define BBM_PWM_WORKTIME_1 1 #define BBM_PWM_WORKTIME_2 2 #define BBM_PWM_WORKTIME_3 3 #define BBM_PWM_V_SUP 5 #define BBM_PWM_ADV_TIME 6 #define BBM_PWM_CHIP_TEMP 7 #define BBM_PWM_LIGHT 8 #define BBM_PWM_CH0 9 #define BBM_PWM_CH1 10 #define BBM_PWM_CH2 11 #define BBM_PWM_ADC_1_MSB 12 #define BBM_PWM_ADC_1_LSB 13 #define BBM_PWM_FIRM_1 14 #define BBM_PWM_FIRM_0 15 //-BBMagic BBair smog sensor module //--------------------------------------------------------------------------------------------- #define BBM_BBAIR_STATUS 0 #define BBM_BBAIR_MEAS_TIME 1 #define BBM_BBAIR_PERIOD 2 #define BBM_BBAIR_V_BAT 3 #define BBM_BBAIR_TEMP_MSB 5 #define BBM_BBAIR_TEMP_LSB 6 #define BBM_BBAIR_RH 7 #define BBM_BBAIR_PM10_MSB 8 #define BBM_BBAIR_PM10_LSB 9 #define BBM_BBAIR_PM2_5_MSB 10 #define BBM_BBAIR_PM2_5_LSB 11 #define BBM_BBAIR_PM1_MSB 12 #define BBM_BBAIR_PM1_LSB 13 #define BBM_BBAIR_FIRM_1 14 #define BBM_BBAIR_FIRM_0 15 //-BBMagic Lib buffer offsets for all devices //--------------------------------------------------------------------------------------------- //-BBMagic device ID #define BBMAGIC_DEVICE_TYPE 4 //-Bluetooth device address #define BBMAGIC_DEVICE_ADDR_5 16 #define BBMAGIC_DEVICE_ADDR_4 17 #define BBMAGIC_DEVICE_ADDR_3 18 #define BBMAGIC_DEVICE_ADDR_2 19 #define BBMAGIC_DEVICE_ADDR_1 20 #define BBMAGIC_DEVICE_ADDR_0 21 //-Bluetooth Radio Sugnal Strength Indicator #define BBMAGIC_DEVICE_RSSI 22 //-BBMagic Lib constants //--------------------------------------------------------------------------------------------- //-bt addres size in bytes #define BBM_BT_ADDR_SIZE 6 //-BBmagic_lib frame size #define BBLIB_FRAME_SIZE 23 //-Divider to calculate module supply voltage in Volts #define BBMAGIC_VCC_DIVIDER 71.0 //--------------------------------------------------------------------------------------------- //--------------------------------------------------------------------------------------------- // COMMUNICATION FUNCTIONS //--------------------------------------------------------------------------------------------- //--------------------------------------------------------------------------------------------- //=========================================================================================== //-Public Function: Opens BBMagic over Bluetooth communication //led_rx_pin : number of RX LED pin, if 0 no RX LED //led_tx_pin : number of TX LED pin, if 0 no TX LED //led_run_pin : number of RUN LED pin, if 0 no RUN LED //mode_flags : flags for library working mode (ex.LIB_SHOW_CONFIG | LIB_SHOW_BBAIR) // LIB_SHOW_CONFIG - show config messages // LIB_SHOW_SENSORS - show sensor messages // LIB_SHOW_ACTORS - show actors messages // LIB_SHOW_BBAIR - show BBair messages //ret val: // 2 - hci dev not found // 4 - cant open hci socket // 6 - cant bind socket // 8 - cant set ioctl // 22 - set scan param error // 24 - ble scan enable error // 26 - socket error 1 // 28 - socket error 2 // 41 - bbmagic_lib already running // 200 - Cant export led_rx_pin // 201 - Cant set direction for led_rx_pin // 202 - Cant open led_rx_pin // 203 - Cant export led_tx_pin // 204 - Cant set direction for led_tx_pin // 205 - Cant open led_tx_pin // 206 - Cant export led_run_pin // 207 - Cant set direction for led_run_pin // 208 - Cant open led_run_pin //=========================================================================================== int bbm_bt_open(int led_rx_pin, int led_tx_pin, int led_run_pin, unsigned int mode_flags) ; //=========================================================================================== //-Public Function: Closes BBMagic over Bluetooth communication //=========================================================================================== void bbm_bt_close(void) ; //=========================================================================================== //-Public Function: reads data from bbmagic modules //bbm_data : pointer to buffer for bbm frame //ret val: // 0 : no new data // >0 : received message from BBMagic device: BBMAGIC_DEVICE_TYPE // -1 : lib is closed - you should end program //=========================================================================================== int bbm_bt_read(uint8_t *bbm_data) ; //=========================================================================================== //-Public Function: checks if bbm frame contains requested device address // addr_ascii - twelve ascii char string - BBMagic bluetooth address // bbm_frame - bbmagic frame //ret val: // 0 : addresses dont match or // 1 : addresses are the same //=========================================================================================== int bbm_check_addr(const unsigned char *addr_ascii, unsigned char *bbm_frame) ; //=========================================================================================== //-Public Function: returns version of bbm library //ret val: // int - bbm_bt_lib version //=========================================================================================== int bbm_bt_lib_version(void) ; //=========================================================================================== //-Public Function: gets machines bluetooth address //ret val: //pointer to six bytes Bluetooth MAC address //=========================================================================================== unsigned char* bbm_bt_myaddr_get(void) ; //=========================================================================================== //-Public Function: returns last two seconds BBMagic lib load info // *min_time - min execution time in miliseconds // *max_time - max execution time in miliseconds //ret val: // two seconds average library load in % : 0-100 //=========================================================================================== unsigned char bbm_lib_get_load(float *min_time, float *max_time) ; //--------------------------------------------------------------------------------------------- //--------------------------------------------------------------------------------------------- // BBMagic RELAY MODULE FUNCTIONS //--------------------------------------------------------------------------------------------- //--------------------------------------------------------------------------------------------- //=========================================================================================== //-Public Function: adds new BBMagic RELAY device to application database //- name - BBMagic RELAY name - its your choice : max 64 bytes //- addr_ascii - twelve ascii char string - BBMagic bluetooth address //ret val: // 0 : device added successfully //-2 : no more resources available //-4 : bluetooth address error - check address //-6 : no name specified - check your device name name //-10 : device with this bt address have been used //=========================================================================================== int bbm_relay_add(const unsigned char *name, const unsigned char *addr_ascii, const unsigned char *key_ascii) ; //=========================================================================================== //-Public Function: truns on requested channels of BBMagic RELAY device //- name - BBMagic RELAY name : max 64 bytes //- relays - relays to switch on : REL_CH0 | REL_CH1 | REL_CH2 | REL_CH3 //ret val: // 0 : send ok //-2 : no BBMagic RELAY module in database with such name // <=-20 : sending error //=========================================================================================== int bbm_relay_on(const unsigned char *name, uint8_t relays) ; //=========================================================================================== //-Public Function: truns off requested channels of BBMagic RELAY device //- name - BBMagic RELAY name : max 64 bytes //- relays - relays to switch off : REL_CH0 | REL_CH1 | REL_CH2 | REL_CH3 //ret val: // 0 : send ok //-2 : no BBMagic RELAY module in database with such name // <=-20 : sending error //=========================================================================================== int bbm_relay_off(const unsigned char *name, uint8_t relays) ; //=========================================================================================== //-Public Function: get state of channel REL_CH0 of the BBMagic RELAY module //- name : BBMagic RELAY name : max 64 bytes //ret val: // 0 : channel is OFF // 1 : channel is ON // -2 : no BBMagic RELAY module in database with such name //=========================================================================================== int bbm_relay_get_ch0(const unsigned char *name) ; //=========================================================================================== //-Public Function: get state of channel REL_CH1 of the BBMagic RELAY module //- name : BBMagic RELAY name : max 64 bytes //ret val: // 0 : channel is OFF // 1 : channel is ON // -2 : no BBMagic RELAY module in database with such name //=========================================================================================== int bbm_relay_get_ch1(const unsigned char *name) ; //=========================================================================================== //-Public Function: get state of channel REL_CH2 of the BBMagic RELAY module //- name : BBMagic RELAY name : max 64 bytes //ret val: // 0 : channel is OFF // 1 : channel is ON // -2 : no BBMagic RELAY module in database with such name //=========================================================================================== int bbm_relay_get_ch2(const unsigned char *name) ; //=========================================================================================== //-Public Function: get state of channel REL_CH3 of the BBMagic RELAY module //- name : BBMagic RELAY name : max 64 bytes //ret val: // 0 : channel is OFF // 1 : channel is ON // -2 : no BBMagic RELAY module in database with such name //=========================================================================================== int bbm_relay_get_ch3(const unsigned char *name) ; //=========================================================================================== //-Public Function: complies all channels state in BBMagic RELAY module //- bbm_msg - pointer to bbmagic message //ret val: // 0 : comply ok //-2 : no BBMagic RELAY module with such address //-4 : not comply, msg send ok //-6 : not comply, sending error //=========================================================================================== int bbm_relay_comply(const unsigned char *bbm_msg) ; //=========================================================================================== //-Public Function: set BBMagic RELAY timer //- name - BBMagic RELAY name : max 64 bytes //- time_s - timer value to set in seconds : max 24*3600 //ret val: // 0 : set ok //-2 : no BBMagic RELAY module in database with such name //=========================================================================================== int bbm_relay_set_trigger(const unsigned char *name, unsigned int time_s) ; //=========================================================================================== //-Public Function: clears BBMagic RELAY trigger //- name - BBMagic RELAY name : max 64 bytes //ret val: // 0 : trigger cleared //-2 : no BBMagic RELAY module in database with such name //=========================================================================================== int bbm_relay_clear_trigger(const unsigned char *name) ; //=========================================================================================== //-Public Function: checks BBMagic RELAY trigger //- name - BBMagic RELAY name : max 64 bytes //ret val: // 0 : no active trigger or no BBMagic RELAY module in database with such name // 1 : trigger is active - time has been expired //=========================================================================================== int bbm_relay_is_trigger(const unsigned char *name) ; //--------------------------------------------------------------------------------------------- //--------------------------------------------------------------------------------------------- // BBMagic DIMMER MODULE FUNCTIONS //--------------------------------------------------------------------------------------------- //--------------------------------------------------------------------------------------------- //=========================================================================================== //-Public Function: adds new BBMagic DIMEMR device to application database //- name - BBMagic DIMMER name - its your choice : max 64 bytes //- addr_ascii - twelve ascii char string - BBMagic bluetooth address //ret val: // 0 : device added successfully //-2 : no more resources available //-4 : bluetooth address error - check address //-6 : no name specified - check your device name name //-10 : device with this bt address have been used //=========================================================================================== int bbm_dimmer_add(const unsigned char *name, const unsigned char *addr_ascii, const unsigned char *key_ascii) ; //=========================================================================================== //-Public Function: sets BBMagic DIMMER to requested value //- name - BBMagic DIMMER name : max 64 bytes //- value - value to set ; 0-100% //ret val: // 0 : send ok // <0 : sending error // <=-20 : sending error //=========================================================================================== int bbm_dimmer_set(const unsigned char *name, unsigned char value) ; //=========================================================================================== //-Public Function: gets BBMagic DIMMER setting //- name - BBMagic DIMMER name : max 64 bytes //ret val: // 0-100 : dimmers current setting // -2 : no BBMagic DIMMER module in database with such name //=========================================================================================== int bbm_dimmer_get(const unsigned char *name) ; //=========================================================================================== //-Public Function: tries to comply BBMagic DIMMER setting // bbm_msg : pointer to bbmagic message //ret val: // 0 : comply ok //-2 : no BBMagic DIMMER module with such address //-4 : not comply, msg send ok //-6 : not comply, sending error //=========================================================================================== int bbm_dimmer_comply(const unsigned char *bbm_msg) ; //=========================================================================================== //-Public Function: set BBMagic DIMMER trigger //- name - BBMagic DIMMER name : max 64 bytes //- time_s - timer value to set in seconds : max 24*3600 //ret val: // 0 : set ok //-2 : no BBMagic DIMMER module in database with such name //=========================================================================================== int bbm_dimmer_set_trigger(const unsigned char *name, unsigned int time_s) ; //=========================================================================================== //-Public Function: clears BBMagic DIMMER trigger //- name - BBMagic DIMMER name : max 64 bytes //ret val: // 0 : trigger cleared //-2 : no BBMagic DIMMER module in database with such name //=========================================================================================== int bbm_dimmer_clear_trigger(const unsigned char *name) ; //=========================================================================================== //-Public Function: clears BBMagic DIMMER trigger //- name - BBMagic DIMMER name : max 64 bytes //ret val: // 0 : trigger cleared //-2 : no BBMagic DIMMER module in database with such name //=========================================================================================== int bbm_dimmer_clear_trigger(const unsigned char *name) ; //=========================================================================================== //-Public Function: checks BBMagic DIMMER trigger //- name - BBMagic DIMMER name : max 64 bytes //ret val: // 0 : no active trigger or no BBMagic DIMMER module in database with such name // 1 : trigger is active - time has been expired //=========================================================================================== int bbm_dimmer_is_trigger(const unsigned char *name) ; //--------------------------------------------------------------------------------------------- //--------------------------------------------------------------------------------------------- // BBMagic PWM MODULE FUNCTIONS //--------------------------------------------------------------------------------------------- //--------------------------------------------------------------------------------------------- //=========================================================================================== //-Public Function: adds new BBMagic PWM device to application database //- name - BBMagic PWM name - its your choice : max 64 bytes //- addr_ascii - twelve ascii char string - BBMagic bluetooth address //ret val: // 0 : device added successfully //-2 : no more resources available //-4 : bluetooth address error - check address //-6 : no name specified - check your device name name //-10 : device with this bt address have been used //=========================================================================================== int bbm_pwm_add(const unsigned char *name, const unsigned char *addr_ascii, const unsigned char *key_ascii) ; //=========================================================================================== //-Public Function: sets BBMagic PWM channels to requested valuees //- name - BBMagic pwm name : max 64 bytes //- ch0 - pwm channel1 0; value to set: 0-100% //- ch1 - pwm channel1 1; value to set: 0-100% //- ch2 - pwm channel1 2; value to set: 0-100% //ret val: // 0 : send ok // <0 : sending error //=========================================================================================== int bbm_pwm_set(const unsigned char *name, unsigned char ch0, unsigned char ch1, unsigned char ch2) ; //=========================================================================================== //-Public Function: gets BBMagic PWM channel 0 setting //- name - BBMagic PWM name : max 64 bytes //ret val: // 0-100 : pwm current channel 0 setting // -2 : no BBMagic PWM module in database with such name //=========================================================================================== int bbm_pwm_get_ch0(const unsigned char *name) ; //=========================================================================================== //-Public Function: gets BBMagic PWM channel 1 setting //- name - BBMagic PWM name : max 64 bytes //ret val: // 0-100 : pwm current channel 0 setting // -2 : no BBMagic PWM module in database with such name //=========================================================================================== int bbm_pwm_get_ch1(const unsigned char *name) ; //=========================================================================================== //-Public Function: gets BBMagic PWM channel 2 setting //- name - BBMagic PWM name : max 64 bytes //ret val: // 0-100 : pwm current channel 0 setting // -2 : no BBMagic PWM module in database with such name //=========================================================================================== int bbm_pwm_get_ch2(const unsigned char *name) ; //=========================================================================================== //-Public Function: tries to comply BBMagic PWM module settings // bbm_msg : pointer to bbmagic message //ret val: // 0 : comply ok //-2 : no BBMagic PWM module with such address //-4 : not comply, msg send ok //-6 : not comply, sending error //=========================================================================================== int bbm_pwm_comply(const unsigned char *bbm_msg) ; //=========================================================================================== //-Public Function: set BBMagic PWM trigger timer //- name - BBMagic RELAY name : max 64 bytes //- time_s - timer value to set in seconds : max 24*3600 //ret val: // 0 : set ok //-2 : no BBMagic PWM module in database with such name //=========================================================================================== int bbm_pwm_set_trigger(const unsigned char *name, unsigned int time_s) ; //=========================================================================================== //-Public Function: clears BBMagic PWM trigger //- name - BBMagic PWM name : max 64 bytes //ret val: // 0 : trigger cleared //-2 : no BBMagic PWM module in database with such name //=========================================================================================== int bbm_pwm_clear_trigger(const unsigned char *name) ; //=========================================================================================== //-Public Function: checks BBMagic PWM trigger //- name - BBMagic RELAY name : max 64 bytes //ret val: // 0 : no active trigger or no BBMagic PWM module in database with such name // 1 : trigger is active - time has been expired //=========================================================================================== int bbm_pwm_is_trigger(const unsigned char *name) ; //--------------------------------------------------------------------------------------------- //--------------------------------------------------------------------------------------------- // TIME FUNCTIONS //--------------------------------------------------------------------------------------------- //--------------------------------------------------------------------------------------------- //=========================================================================================== //-Public Function: checks if now there is requested time // week_day_bits : day of week : SU | MO |TU | WE | TH | FR | SA or ND | PN | WT | SR | CZ | PT | SO // f_time : time in float ex.:23.21 //ret val: // 1 : yes, it is the time // 0 : no, it is not the time //=========================================================================================== int bbm_time_is_now(uint8_t week_day_bits, float f_time) ; //=========================================================================================== //-Public Function: checks if now is in requested boundaries // f_start : start boundary - time in float form ex. 12:23 // f_end : end boundary - time in float form ex. 12:23 //ret val: // 1 : yes, now is between // 0 : no, now is not in boundaries or boundaries are out of range //=========================================================================================== int bbm_time_is_between(float f_start, float f_end) ; //=========================================================================================== //-Public Function: stops program for requested miliseconds // ms - miliseconds to sleep, max. 60000 //ret val: //=========================================================================================== void bbm_sleep_ms(int ms) ; //=========================================================================================== //-Public Function: prints local time in requested form // form - like strftime function: // %H - The hour as a decimal number using a 24-hour clock (range 00 to 23) // %I - The hour as a decimal number using a 12-hour clock (range 01 to 12) // %p - Either "AM" or "PM" according to the given time value // %M - The minute as a decimal number (range 00 to 59) // %S - The second as a decimal number (range 00 to 60). (The range is up to 60 to allow for occasional leap seconds.) // %d - The day of the month as a decimal number (range 01 to 31) // %m - The month as a decimal number (range 01 to 12) // %y - The year as a decimal number without a century (range 00 to 99) // %Y - The year as a decimal number including the century. // %j - The day of the year as a decimal number (range 001 to 366) // %n - A newline character. // %R - The time in 24-hour notation (%H:%M) // %T - The time in 24-hour notation (%H:%M:%S) //ret val: //=========================================================================================== void bbm_print_local_time(const char *form) ; //--------------------------------------------------- #define LIB_SHOW_CONFIG 0x01 #define LIB_SHOW_SENSORS 0x02 #define LIB_SHOW_ACTORS 0x04 #define LIB_SHOW_BBAIR 0x08 #define SU 0x01 #define MO 0x02 #define TU 0x04 #define WE 0x08 #define TH 0x10 #define FR 0x20 #define SA 0x40 #define ND 0x01 #define PN 0x02 #define WT 0x04 #define SR 0x08 #define CZ 0x10 #define PT 0x20 #define SO 0x40 #endif //-ndef __BBMAGIC_LIB_H